Adjust parking brake cable tensioner.
Release the parking brake, and we're almost ready to go.
The large drum brake of Nissan diesel technology provides the vehicle with larger brake torque for both service brake and parking brake and ensure driving safety.
Install rotor, caliper, and wheel and tire assembly, then adjust parking brake shoes.
In the event of a failure of the first brake circuit, the spring store part 86 can be deaerated in order to engage the parking brake.
A parking brake system can prevent the auto slipping away from its parking place, even if it is parked on a steep slope.
Turn on the engine. Release the parking brake and select the correct gear to move back onto the road.
If your vehicle has a manual transmission, set the parking brake and shift into neutral if not turning off the engine, or shift into low or reverse if turning off the engine.
Braking system double pipe air brake system, parking brake, exhaust brake.
Be sure to connect the parking cord( Light green) to the parking brake switch cord. The mounting position of the parking brake switch cord depends on your car.
The car should be on a level surface with the parking brake on and engine off.
When parking on a hill or grade, turn your wheels safely into the curb, and be sure to set the parking brake.
Because of its simple structure, good braking performance and good serviceability, duo-servo drum brakes are widely used as light vehicle central parking brake systems.
Install parking brake lamp switch.
Preparation before working: observe whether the area is accord with requirements before working. Pull on parking brake after parking.
The brake shoes on this system are connected to a lever that is pulled by the parking brake cable to activate the brakes .
The procedure for replacing the damper is described in the chapter removing and installing damper for foot-operated parking brake in the workshop manual.
adjustment of the valve clearance and parking brake.
The simulation test method and assessment technique of parking brake assemblies on the bench are discussed in this paper, the approach for improving the performance of parking brake is also proposed.
Connect parking brake cable to brackets and lever.
Insert front cable through the parking brake lever basInsure the cable retainer is seated into the base.
Connect light green lead to parking brake switch lead of car.
Pull on parking brake after parking.
The spring brake air chamber of motor vehicle, acting as the power installation of brake actuating system, improves the efficacy and simplifies the construction of parking brake system.
